Quasar® Sensor Loupe® The first step in cleaning your DSLR is to inspect the sensor to determine if it has any debris on it.

In the past this was a cumbersome task using the 'f/22 test'. Now the most effective way to view any debris on the sensor and within the chamber area is to use the Quasar™ Sensor Loupe® with its BriteVue XL™ technology from VisibleDust.
     
Dry Cleaning Method
removal of dry dust contamination (90-99%)
This method is used when a dry dust contamination has been detected on the sensor which occurs 90-99% of the time when a contamination has been discovered.


Arctic Butterfly® Sensor Brush®


Zeeion® blower
Arctic Butterfly®
(Super Bright)

Sensor Brush®

Now equipped with 2 super bright LEDs.It is easily removed within minutes with the Arctic Butterfly® (Super Bright). Using the specially fabricated SCF technology, dust is effectively drawn from your sensor onto the bristles leaving you with a clean sensor and crystal clear pictures.
  Zeeion® Blower


This advanced feature with its weak and selective ion generation capability should be used for sensor dust and sensor static charge removal.

Ejecting pure filtered air

Projectile free action
 
Wet CleaningMethod
removal of stain contamination (1-10%)
This method is used when a stain has been detected on the sensor which occurs 1-10% of the time when a contamination has been discovered.
Water stain

Sensor Clean™ green Vswab® (Ultra MXD-100™)
  Water and oil stains

VDust Plus™ Ultra MXD-100™ (green) / DHAP™ (orange) Vswab®
  Oil stains

Smear Away™Ultra MXD-100™ (green)Vswab®
Sensor Clean™
Ultra MXD-100™ (green) Vswab®

Water based stains occur when humidity builds up within the chamber area and moisture accumulates on the sensor, or when around very moist areas (waterfalls, rain, etc).
  VDust Plus™
Ultra MXD-100™ (green) /
DHAP™ (orange) Vswab®
When the nature of the stain is unknown we recommend using VDust Plus™ with our sensor cleaning swabs. This combination remove water stains and light oil stains.
  Smear Away™
Ultra MXD-100™ (green)Vswab®

Oil based stains occur when lubricant from the camera mechanisms (shutter, mirror) spatter onto the sensor.
     
  Quasar® Sensor Loupe® The final stage of cleaning your DSLR is to inspect the sensor to determine if it has any debris on it.
The high quality optical glass used in the Quasar™ Sensor Loupe® 7X is coated with MgF2 for sharp crystal clear image in order to reduce chromatic aberrations and to achieve the highest optical resolution possible. The high caliber materials used in construction of the Quasar™ SensorLoupe® provide a high resolution, sharp crystal clear image.